User's Manual

E. Troubleshooting, Care and Maintenance

Please read this owner's manual carefully and follow the

steps described in it. If you still have difficulties, consult the

following table. It will guide you though the most common

problems and their solutions.

Problem Possible solution

Remote control

dose not work

1. Code of 4642T/R Partnership right?

2. Battery of 4642T enough?

3. If antenna is pulled out or if LED lights

4. Make sure that the receiving antenna not

circle around power cord.

5. If powered by nominal AC15V.

6. Adjust the length of DC12V power cord

7. Pull out AC15V power reinsert plug

Note: Clean the outside plastic packaging with a soft cloth

lightly moistened with mild soap and water. Never use

any abrasive scouring powder or solvent.

F. Specifications

Remote Transmitter: 4642T

RF Output Power 3dBm± 3dBm

RF Transmitter Frequency 433.92MHz

Battery 12VDC(GP23A 1PCS)

Transmitter Current 40mA

Maintain Current 40nA

Dimension 95mm× 48mm× 28mm

Weight 40g

Rotating Pannier: 4642R

RF Receiver Sensible -80dBm(excel)

RF Receiver frequency 433.92MHz

Auto/Remote scanning angle 370

Manual Adjust angle 75

Max

Speed of Scanning 50 seconds /change

Max load 650g

Noise (away 30cm unload) Less Than 40db

Power Supply 15VAC 400mA

Output Power 12VDC 200mA

Dimension 100mm× 100mm× 100mm

Weight 320 g

System: 4642T and 4642R

Operation temperature range 0? ~50?

Remote control range Up to 50meter (line of sight)

•

All specification subject to change without notice