User's Manual

D. Setting Up 2.4GHz wireless Audio Link
Make sure the ON/OFF switch is in the
c
OFF
f
position before connection.
■ How To Transmit Audio from Your DVD Player
To enjoy wireless audio, just connect the transmitter to whatever
audio source you want to enjoy from another location, and connect
the receiver to the headphone or powered speakers in that other
location.
You can transmit audio either directly from your DVD Player, or by connecting
them to your other Audio sources. To transmit directly from your DVD Player,
follow the instructions below.
1.
Connect one set of audio cables to the Audio jacks of the transmitter and to
the audio
OUT
jacks of the DVD Player. If you use dual
RCA
cables
,
be sure
the red and white plugs match the red and white jacks on both the DVD
Player and the transmitter.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 120-volt wall outlet. Use only the adapter provided.
3.
Locate and orient the transmitter according to the section of this manual
titled "Orienting Units for Optimum Performance" for best performance of
transmitter.
Audio link system is suggested to connect to following Audio equipment
use:
Audio sources:
i
Compact Disk player or Changer
i
Stereo Receiver
i
Cassette Deck
i
DVD Player or other Audio source.
7
8