User's Manual
Table Of Contents
- Important Notice
- Safety Precaution
- Caution
- Accessories
- Display Port Description
- Remote Control Operation
- Remote Control Operation (continued)
- General Operating Instructions
- Screen 1
- Note: For ROW regions where apps are not available, content wizard will not appear atall in OOBE.
- Note: Header will still scroll up after moving from first item in touch and remote behavior.
- Note: When the customer taps a toggle item by touch when it is not in the selected slot showing the description, it will take take action to change the state and advance the item to the selected slot to reveal the info.
- Note: The selected item will become in focus on first D-Pad action with remote, second action will begin navigation. HUD Peek is removed.
Remote Control Operation
Installing or Replacing the Battery
1. On the rear of the remote control, remove the battery
cover.
2. Install two “AAA” batteries as shown.
The remote control is only designed to operate this device. It is not a universal
remote control and will not operate any other device.
Warning/Caution on using batteries
• Always ensure that the battery is inserted with the positive and negative
terminals in the correct direction as shown in the battery compartment.
• If the remote control fails to function, replace the battery before seeking
repairs at the dealer.
• Keep batteries out of the reach of children. Should the battery be swallowed,
immediately consult a doctor. When disposing of used batteries, please
comply with governmental regulations or environmental public institution
rules that apply in your country/area.
• Remove the battery if the remote control is not used for a month orlonger to
avoid corrosion and damage to the remote control.
Port Name
DESCRIPTION
1
Audio
Out
3.5mm Audio Jack Output
2
USB Type
C
USB Type-C Charging Port (15Watts)
3
HDMI In
HDMI Input (Supports up to 1080p)