Instructions / Assembly

Plastic Utility Carts

Models PUC-3117 and PUC-3725

• Review all instructions before assembling the cart.

• Improper assembly can cause personal injury and/or property damage.

• Maximum load is 550 lbs. distributed evenly. Do not overload cart.

• Do not step into or on the cart, or use it as a toy.

To assemble the cart, follow the illustrations below. You will need a cross-point screwdriver and a rubber

or wood mallet. Use the mallet to tap down the parts to ensure they are seated properly before fastening

them with screws. (NOTE: Numerals refer to parts list on reverse side of this sheet.)

JET

427 New Sanford Road

LaVergne, Tennesseee 37086 Part No. M-140018

Ph.: 800-274-6848 Revision C 03/2018

PAGE 1
Plastic Utility Carts Models PUC-3117 and PUC-3725 • • • • Review all instructions before assembling the cart. Improper assembly can cause personal injury and/or property damage. Maximum load is 550 lbs. distributed evenly. Do not overload cart. Do not step into or on the cart, or use it as a toy. To assemble the cart, follow the illustrations below. You will need a cross-point screwdriver and a rubber or wood mallet.
PAGE 2
Specifications: PUC-3117 Stock Number .......................................... 140018 Maximum Capacity (lbs.) ................................ 550 Platform Size (in.)(LxWxH)............ 31 x 17 x 4.33 Upper Platform Height (in.) ........................... 33½ Height between Platforms (in.) .................... 19.68 Low Platform Height (in.).................................... 6 Caster Size (in.)(O.D. x W) .......................... 5 x 1 Overall Size (in.)(LxWxH).......... 39¾ x 17 x 33½ Approx.