Manualshelf

Instructions / Assembly

ManualsBrandsJet ManualsAutomotive3-Ton 2-Speed Electric Hoist 3-Phase 10 ft. Lift, with Electric 2-Speed Trolley 3PH, and 4 Button Wired Pendant
11121314151617181920
15
11. Install chain container, making sure to install the
self-locking nut on the screw. Do not fill chain
container by hand.
12. Press UP button to further lower some of the
slack end of chain into container, while keeping
light tension on the load end of chain.
13. Attach the load hook using the chain puller, as
shown in Figure 13-5.
14. Attach the load end of chain to the connecting
pin on the hoist. Make sure the chain does not
twist to accommodate the pin.
15. Test limit switches by raising and lowering hook.
Inspect chain for any signs of twist or binding,
and correct before continuing.
Figure 13-5