Instructions / Assembly

20
17.2 Chain wear limits
Carefully inspect the entire load chain each month. Measure each link with the provided chain gauge. See Figures
16-4 and 16-5. Any load chain that shows noticeable deformation or heat influence must be replaced with a new
one. Never extend load chain by welding a second piece to the original.
The load sheave and chain regulator must also be inspected, as any wear or damage to the chain will be
transmitted to these parts also.
Any replacement of chain and sheave elements must be done by qualified persons only.
OK
NO
OK
OK
NO
Figure 16-4: pitch Figure 16-5: diameter
Model
Diameter
(mm)
(d)
Inside
Length
(mm)
(p)
Inside
Width
(mm)
(b1)
Outside
Width
(mm)
(b2)
Breaking
Load
(kN)
TS050
Ø6.3
19.1
7.9
21.4
50
TS100
Ø7.1
20.2
8.1
23.2
63.3
TS200
TS300
Ø10.0
30.2
12.5
33.2
128
TS500
Ø11.2
34
14
37.5
160
Table 7