Warranty

2SS-1C-15, 2-TON ELECTRIC CHAIN
HOIST 1-PHASE 15' LIFT
211500
JET® SSC Series electric hoists combines safety and durability to operate in
commercial and industrial applications. All models incorporate a slip clutch overload
protection mechanism that prevents the hoist from lifting damaging loads above its
rated capacity. They are available in single or three phase configurations to suit your
electrical needs. Single phase models have a thermal overload protection design
that keeps the hoist from overheating, while the three phase models feature a
reverse phase relay that protects the hoist from incorrect wiring. The industry proven
DC electro-magnetic brake increases safety by holding the load even when power is
interrupted. The maintenance-free gear train incorporates a sealed oil bath, for
reliability and durability. The JET® SSC series electric hoist is available in ½ ton to 5
ton capacities with standard lifts of 10, 15, and 20 feet (custom lifts available).
Certification- Load tested to 125% of capacity with certificate
Controls- NEMA 4X compliant push button control pendants
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are
NOT rated or designed for outdoor use or wet environments
SAFETY
Overload Protection- Slip Clutch design prevents the hoist from lifting damaging
loads above its rated capacity
Thermal Overload Protection- Protects the hoist from overheating in low voltage
situations
DC Electro-Magnetic Brake- An industry-proven safety feature that secures the
load even if power is interrupted to the hoist
Limit Switches- Upper and lower limiting switches increase safety by preventing
the load chain from over traveling
DURABILITY
Sealed Gear Train- Maintenance-free gear train incorporates a sealed oil bath that
eliminates upkeep
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Control Pendant- 24 volt push button controller with cable strain relief system for
durability and reliability in industrial and commercial settings
All Steel Construction- Fully enclosed, all steel plate construction with a durable
powder coat finish keeps out moisture, dust and debris lengthening the life of the
hoist
PERFORMANCE
Single Phase:
Duty Rating- H3
Duty Cycle- 25%
Standards
This product complies with ANSI / ASME B30.16 and HST-1 standards
FEATURES
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United
States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you
in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area
call 1-800-274-6848.