Warranty

2-HDT, 2-TON MANUAL TROLLEY

262020

JET® HDT Series manual trolleys are available in capacities from 1/2 ton to 5 Tons.

They are designed for low maintenance, trouble free use on wide flange H-beams,

standard I-beams or curved track. Each JET® Manual Trolley conforms to OSHA

regulations, and ANSI / ASME standards

Durability

Welded all-steel frame and powder coat finish provide maximum durability and

protection

Built-in bumper guards on the side plates increase safety and extend trolley life

Hardened steel wheels and double sealed lubricated ball bearings provide

smooth movement

Easily adjustable to wide-flange H-beams, standard I-beams or curved track with

the included spacer washers

Standards

Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards

Certification- Load tested to 125% of capacity with certificate

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
2-HDT, 2-TON MANUAL TROLLEY 262020 JET® HDT Series manual trolleys are available in capacities from 1/2 ton to 5 Tons. They are designed for low maintenance, trouble free use on wide flange H-beams, standard I-beams or curved track.
PAGE 2
-HDT, 2-TON MANUAL TROLLEY 262020 SPECIFICATIONS Load Capacity (Tons) 2 Minimum Beam Flange Width (In.) 3-1/4 - 8 Minimum Beam Heighth (In.) 6 Minimum Beam Curve Radius (In.
PAGE 3
2-HDT, 2-TON MANUAL TROLLEY 262020 FULL SERIES STOCK NO MODEL NO LOAD CAPACITY (TONS) MINIMUM BEAM FLANGE WIDTH (IN.) MINIMUM BEAM HEIGHTH (IN.) MINIMUM BEAM CURVE RADIUS (IN.