Use and Care Manual

5
4.0 Specifications
JMD-15 JMD-18 JMD-18PFN
Stock No. 350017 350018 350020
Drilling Capacity 1” 1-1/4” 1-1/4”
Face Mill Capacity 2-1/2” 3” 3”
End Mill Capacity 1/2” 3/4” 3/4"
Swing 14-1/2” 15-7/8” 15-7/8”
Maximum Distance Spindle to
Table
15” 17-1/2” 26”
Spindle Taper R-8 R-8 R-8
Spindle Travel 3-1/2” 5” 5”
Quill Diameter 2-1/2” 3” 3”
Head Swivel 360° 360° 360°
Column Diameter 3-5/8” 4-1/2” 4-1/2”
Number of Power Downfeeds ---- ---- 3
Range of Power Downfeeds ---- ---- 0.0047”, 0.007”, 0.01”
Number of Spindle Speeds 12 12 12
Range of Spindle Speeds 110-2,580 RPM 150-3,000 RPM 150-3,000 RPM
Maximum Table Travel 14” 20-1/2” 20-1/2”
Cross Travel 6” 7” 7”
Working Surface of Table 7-1/2” x 23” 9-1/2” x 31-3/4” 9-1/2” x 31-3/4”
Number of T-Slots 4 4 4
T-Slot Size 9/16” 5/8” 5/8”
T-Slot Centers 1-1/2” 2-1/8” 2-1/8”
Overall Dimensions
36-1/2”L x 37-1/2”W x
35-1/2”H
42-1/2”L x 39-3/4”W x
43-1/2”H
42-1/2”L x 39-3/4”W x
51-1/2”H
Base Dimensions 12-1/2” x 19-3/4” 15-3/4” x 23-3/4” 15-3/4” x 23-3/4”
Motor (UL listed)
1HP, 1PH, 115/230V
(prewired 115V), 60Hz
2HP, 1PH, 115/230V,
(prewired 115V), 60Hz
2HP, 1PH, 115/230V,
(prewired 115V), 60Hz
Net Weight (approx.) 440 lbs. 660 lbs. 700 lbs.
Shipping Weight (approx.) 540 lbs. 760 lbs. 800 lbs.
The specifications in this manual are given as general information and are not binding. JET reserves the
right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory
equipment deemed necessary for any reason whatsoever.