Warranty

JMD-18 MILL/DRILL WITH NEWALL

DP500 DRO

350133

Mill drills are a lighter alternative to a milling machine. These combine a belt driven

drill press with the dual coordinate abilities of the milling machine's table for

flexibility and efficiency. A locking collet prevents the cutting tool from falling away

from the spindle when lateral forces are experienced against the bit. Although light in

construction, the JMD Milling Drilling Machines possess the advantages of space-

saving versatility, affordability and light machining capability.

One-piece cast iron column for added support

Belt cover with quick slide latch allows faster belt adjustment to change spindle

speeds

Base taper allows for easier clean up

Drill Press angle vise

UL Listed motor

Extra large worktable

Positive quick-stop knob and easy to read internal depth gauge

360° head swivel

Work lamp

Forward and Reverse Switch

½” drill chuck, chuck arbor

Draw bar

Drill Chuck Guard

Adjustable Carbide facemill

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
JMD-18 MILL/DRILL WITH NEWALL DP500 DRO 350133 Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine's table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit.
PAGE 2
JMD-18 MILL/DRILL WITH NEWALL DP500 DRO 350133 SPECIFICATIONS Drilling Capacity (In.) 1-1/4 Face Mill Capacity (In.) 3 End Mill Capacity (In.) 3/4 Max Distance Spindle to Table (In.) 17-1/2 Spindle Taper (In. x TPI) R-8 Spindle Travel (In.) 5 Quill Diameter (In.) 3 Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 150 - 3,000 Table Size (L x W) (In.) 9-1/2 x 32-1/4 Table Longitudinal Travel (In.) 20-1/2 Work Table Weight Capacity (Lbs.) 400 T-Slots Number and Size (In.
PAGE 3
JMD-18 MILL/DRILL WITH NEWALL DP500 DRO 350133 FULL SERIES STOCK NO MODEL NO POWERFEED 350017 JMD-15 350116 JMD-15 350125 JMD-15 350018 JMD-18 350119 JMD-18 350401 JMD-18 350126 JMD-18 350127 JMD-18 X-Axis 350020 JMD-18PFN Downfeed 350402 JMD-18PFN Down Feed 350120 JMD-18PFN 350128 DIGITAL READOUT DRILLING CAPACITY (IN.) FACE MILL CAPACITY (IN.) END MILL CAPACITY (IN.