Use and Care Manual

ManualsBrandsJET ManualsPower Tool AccessoriesJET X-Axis Table Powerfeed

3.0 About this manual

This manual is provided by JET for the JET Table Powerfeed. This manual contains instructions on installation,

safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your

powerfeed has been designed and constructed to provide consistent, long-term operation if used in accordance

with instructions set forth in this document.

If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our

web site: www.jettools.com.

Retain this manual for future reference. If the Powerfeed transfers ownership, the manual should accompany it.

http://www.jettools.com/us/en/service-and-support/product-registration/

4.0 Specifications

Model number ........................................... TPFA-X ....................................TPFA-Y .................................. TPFA-Z

Stock number ............................................. 350194 .................................... 350195 ................................... 350196

Table movement .................... X-axis (longitudinal) ................... Y-axis (crossfeed) ..................................... Z-axis

Speed rate, variable ...... 0-32 ipm (0-812.8 mm/m) ........ 0-32 ipm (0-812.8 mm/m) ...... 0-32 ipm (0-812.8 mm/m)

Maximum torque (in/lb) .................................... 780 .......................................... 780 ......................................... 780

Maximum rotation ...................................... 160 rpm ................................... 160 rpm .................................. 160 rpm

Rapid traverse ...................... 32 ipm (812.8 mm/m) .............. 32 ipm (812.8 mm/m) ............. 32 ipm (812.8 mm/m)

Leadscrew pitch ........................... 5 tpi (5.08 t/mm) ...................... 5 tpi (5.08 t/mm) ..................... 5 tpi (5.08 t/mm)

Motor ............................... 105W/1Amp, 115V, 1PH ......... 105W/1Amp, 115V, 1PH ........ 105W/1Amp, 115V, 1PH

Net weight ................................................. 12.76 lb ....................................12.76 lb .................................. 12.76 lb

Shipping weight ........................................... 14.3 lb ......................................14.3 lb .................................... 14.3 lb

Shipping dimensions ...... 10.5”L x 6.9”W x 14.56”H ........ 10.5”L x 6.9”W x 14.56”H ....... 10.5”L x 6.9”W x 14.56”H

The specifications in this manual were current at time of publication, but because of our policy of continuous

improvement, JET reserves the right to change specifications at any time and without prior notice, without

incurring obligations.

5.0 Setup and Assembly

5.1 Unpacking and cleanup

Open shipping container and check for shipping

damage. Report any damage immediately to your

distributor and shipping agent. Do not discard any

shipping material until the Powerfeed is assembled

and running properly.

Compare the contents of your container with the

following parts list to make sure all parts are intact.

Missing parts, if any, should be reported to your

distributor. Read the instruction manual thoroughly

for assembly, maintenance and safety instructions.

Some parts may have been given a protective

coating. Remove this using a soft cloth and a

cleaner degreaser.