Use and Care Manual

8
Figure 7
5.5.2 Y-Axis powerfeed
Figure 8 shows installation of Y-Axis powerfeed.
These instructions are similar (with the exception of
the adaptor) to those in section 5.4, steps 1
through 10.
Important: Before drilling and inserting the roll pin,
make sure all previous steps have been done
carefully and correctly.
Figure 8
5.6 Z-Axis (Knee-lift) installation
5.6.1 Z-Axis track
Refer to Figure 9 to install Z-axis track.
Figure 9