Warranty

J-A2608-1, 20" ARBOGA GEAR HEAD

DRILL PRESS 120V, 1PH

354027

A workhorse of a machine for precision production drilling applications. The head

and table rotate 360 degrees around the column for maximum mobility. Eight drilling

speeds provide high torque at lower speeds for both small and medium hole

drilling. Special helical gears help maintain this drill's smooth, quiet operation.

Fiber and steel gears, which do not require an oil bath, allow for easier speed

changes

Adjustable taper bearings mounted in the end of the quill

Head and table rotates 360° around column

Drill head and table can be raised and lowered

Safety latch to prevent head dropping when unclamped

Helical gears for smooth, quiet operation

Quick release drill ejector

English/metric depth gauge

T-Slotted table with coolant trough

Machined, T-slotted base plate

3-15/16" Steel column

Extra long quill movement

Fully enclosed spindle

Large T-slotted table

Telescoping safety spindle guard

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
J-A2608-1, 20" ARBOGA GEAR HEAD DRILL PRESS 120V, 1PH 354027 A workhorse of a machine for precision production drilling applications. The head and table rotate 360 degrees around the column for maximum mobility. Eight drilling speeds provide high torque at lower speeds for both small and medium hole drilling. Special helical gears help maintain this drill's smooth, quiet operation.
PAGE 2
J-A2608-1, 20" ARBOGA GEAR HEAD DRILL PRESS 120V, 1PH 354027 SPECIFICATIONS Style (Type) Geared Head Drills to Center of Circle (In.) 20 Drilling Capacity Cast Iron (In.) 1-3/8 Drilling Capacity Mild Steel (In.) 1-1/4 Column Diameter (In.) 3-15/16 Distance Column to Spindle (In.) 10 Range of Spindle Speeds (RPM) Low - 130, 260, 420, 840; High - 535, 1070, 1745, 3480 Spindle Taper (In. x TPI) MT-3 Spindle Travel (In.) 5-1/8 Spindle Distance to Base (In.