Warranty

ManualsBrandsJet ManualsAutomotiveJLH-75WO 3/4-Ton Lever Hoist with 10 ft. Lift and Overload Protection

JLH SERIES 3/4 TON LEVER HOIST,

10' LIFT WITH OVERLOAD

PROTECTION

376101

JET® JLH Series Lever Hoists incorporate safety, durability, and heavy duty

construction for operation in severe industrial environments. Safety comes standard

with features such as overload protection, which prevents the lever hoist from lifting

or pulling damaging loads beyond its rated capacity. The JET® JLH Series is

available in ¼ ton to 9 ton capacities, with standard lifts of 5, 10, 15, and 20 feet

(custom lifts available). Whether it’s inverted, vertical, horizontal, or any other load

angle, the JET® JLH lever hoist is the solution for your heavy-duty industrial needs.

Standards

This product complies with ANSI / ASME B30.21 and HST-3 standards

Load tested to 125% of capacity with certificate

Safety

Backed by a lifetime replacement warranty, JET’s revolutionary single-piece brake

design fuses the three components into the safest brake system in the market

NEW! All JLH-Series Lever Hoists come with slip clutch style overload protection

that prevents lifting or pulling damaging loads beyond the rated capacity of the

hoist and when triggered, the overload protection can be reset on site

Weston style double ratchet pawl brake design splits the load to opposite sides

of the ratchet gear for greater load security

NEW! JET’s improved easy free chain design is a two-step, no load, free chaining

system. The system permits quicker hoist positioning and take up of slack chain.

And it is engineered not to free chain under load

NEW! The patented, advanced offset handle design allows for extra clearance

between the operator's hand and the load chain

Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly

stretch to indicate an overload situation

Optional Shipyard Hooks are blunt tip hooks, designed for point loading and

virtually eliminate stretched hooks, reducing downtime for maintenance and

repair

Enhanced ergonomic grip allows for greater operator control and increased

comfort

Durability

Grade 100, corrosive resistant plated load chain is a smaller, more compact link

that is 20% stronger than Grade 80 load chain

Secured with Allen screws and lock nuts, the cast-steel safety latches are more

durable than stamped steel latches and will not bend out of compliance with

lifting regulations

Intended for the harshest environments, the heat treated load plates and case

hardened corrosive resistant internal parts extend the life of the hoist

Caged needle bearings support the load sheave to increase efficiency and

promote smooth operation

Impact resistant all steel construction for added durability and protection

The lightweight design with shorter handle and smaller body are ideal for

confined areas and low headroom applications

FEATURES

JET RED ASSURANCE LIFETIME WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

Summary of content (4 pages)

PAGE 1
JLH SERIES 3/4 TON LEVER HOIST, 10' LIFT WITH OVERLOAD PROTECTION 376101 JET® JLH Series Lever Hoists incorporate safety, durability, and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. The JET® JLH Series is available in ¼ ton to 9 ton capacities, with standard lifts of 5, 10, 15, and 20 feet (custom lifts available).
PAGE 2
JLH SERIES 3/4 TON LEVER HOIST, 10' LIFT WITH OVERLOAD PROTECTION 376101 SPECIFICATIONS Load Capacity (Tons) 3/4 Lift (Ft.) 10 Overload Protection Yes Ship Yard Hooks No Headroom (In.) 11 Handle Length (In.) 9-5/8 Lever Pull Force (LBF) 64 Lift per Turn (In.) 1-1/8 Number of Falls 1 Load Chain Dimensions (Mm.) 5.6 x 15.7 Load Capacity (Metric Tons) 0.8 Hook Throat Opening (In.) 1 Overall Width (In.) 5-2/3 Weight (Lbs.
PAGE 3
JLH SERIES 3/4 TON LEVER HOIST, 10' LIFT WITH OVERLOAD PROTECTION 376101 FULL SERIES STOCK NO MODEL NO LOAD CAPACITY (TONS) LIFT (FT.) OVERLOAD PROTECTION SHIP YARD HOOKS HEADROOM (IN.
PAGE 4
JLH SERIES 3/4 TON LEVER HOIST, 10' LIFT WITH OVERLOAD PROTECTION 376101 FULL SERIES STOCK NO MODEL NO LOAD CAPACITY (TONS) LIFT (FT.) OVERLOAD PROTECTION SHIP YARD HOOKS HEADROOM (IN.