Use and Care Manual

6
Introduction
The JET Model J-F225 Cold Saw is a pendulum bench saw designed for cutting metals. Operation is
manual: after turning on the electrical power supply to the machine and clamping the workpiece in the
vice, the operator starts the blade by pressing the micro switch located on the control lever; he then
moves the head downwards in order to cut the material; after completing the cut, the cutting head returns
to position ready for a new cutting cycle. The Model J-F225 can perform miter cuts up to 45° to the left.
Specifications
Model Number ................................................................................................................................ J-F225
Stock Number................................................................................................................................ 414220
Disc Blade
Disc diameter .................................................................................................................... 225mm (9 in.)
Hole diameter (in) .............................................................................................................................. 1.3
Blade thickness (in) ......................................................................................................................... 0.08
Cutting Speed
Blade Speed (RPM) ............................................................................................................................ 50
Vise Opening (Max) ................................................................................................................................. 6
Motor ................................................................................................................. 1HP, 1PH, 115VAC, 60Hz
Other
Coolant Capacity ..................................................................................................................... 2.7 quarts
Dimensions............................................................................................................... 25"L x 15"W x 28"H
Weight ........................................................................................................................................... 84 lbs
Cutting Capacity
Degree Round Square (vise slot clamp) Rectangle
90° Ø 2-1/2” 2-1/4”(W) x 2-1/4”(H) 2-1/2”(W) x 2-15/16”(H)
45°
Ø 2”
1-5/8”(W) x 1-5/8”(H) 1-3/4”(W) x 1-1/4”(H)
The specifications in this manual are given as general information and are not binding. JET reserves the
right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory
equipment deemed necessary for any reason whatsoever.