Warranty

HBS-56S, 5" X 6" HORIZONTAL

MITERING BANDSAW

414457

JET Mitering Horizontal bandsaws unique design features a swiveling head while

the base remains stationary. This allows the stock to remain same position while

making accurate crosscuts and miters. Backed by the industry leading two year

warranty, JET Mitering Bandsaws are built to last and deliver precision results.

For added safety, the HVBS-56S follows strict guidelines and electrical

requirements to be certified by CSA Group

Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an

oil bath

Mitering head swivels to cut any angle 0° - 60° while the work piece remains

secured

Ball bearing supported blade wheel

Fully adjustable hydraulic downfeed system

Deluxe enclosed stand with wheels and handle for easy movement

Adjustable material stop

1/2" Carbon Steel Blade

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
HBS-56S, 5" X 6" HORIZONTAL MITERING BANDSAW 414457 JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results.
PAGE 2
HBS-56S, 5" X 6" HORIZONTAL MITERING BANDSAW 414457 SPECIFICATIONS Rectangle at 60 Degrees (In.) 5 x 1-3/4 Cutting Capacity (W x D) (In.) 5x6 Round at 90 Degrees (In.) 5 Round at 45 Degrees (In.) 3 Rectangle at 90 Degrees (In.) 5 x 6 and 2 x 6-3/4 Rectangle at 45 Degrees (In.) 4 x 2-3/4 and 2 x 3-3/4 Vise Swivels (Deg.) 45° Head Movement (Deg.) 60° Blade Size (In.) 1/2 x .025 x 64-1/2 Blade Length (In.) 64-1/2 Blade Wheel Diameter (In.