Warranty

ManualsBrandsJet ManualsBand Saws10 in. x 16 in. 1-1/2 HP, 230-Volt/460-Volt Metalworking Horizontal Mitering Bandsaw 3Ph

J-7040M, 10" X 16"

HORIZONTAL MITERING

BANDSAW

414475

JET Mitering Horizontal bandsaws unique design features a swiveling head while

the base remains stationary. This allows the stock to remain same position while

making accurate crosscuts and miters. Backed by the industry leading two year

warranty, JET Mitering Bandsaws are built to last and deliver precision results.

Mitering head swivels to cut any angle 0° - 45° while the work piece remains

secured

Swing away control panel houses major saw controls

Variable speed drive system allows the operator to easily fine tune the blade

speed

Adjustable blade guide with six contact point system that utilizes cam follower

bearings mounted on eccentric shafts on both sides of the blades

The blade rides on two load bearings mounted on a pivot shaft with the side

bearings and carbide pads assisting in distributing the load equally

Downfeed system is controlled by a dual system of counterbalance springs

working with a hydraulic cylinder

Heavy-Duty transmission utilizes hardened and ground gears operating in an oil

bath

Cast Iron blade wheels

Coolant system

Adjustable material stop

1" Bi-Metal blade

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most

cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET

tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Summary of content (2 pages)

PAGE 1
J-7040M, 10" X 16" HORIZONTAL MITERING BANDSAW 414475 JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results.
PAGE 2
J-7040M, 10" X 16" HORIZONTAL MITERING BANDSAW 414475 SPECIFICATIONS Cutting Capacity (W x D) (In.) 10 x 16 Round at 45 Degrees (In.) 8-1/2 Round at 90 Degrees (In.) 10 Rectangle at 45 Degrees (In.) 8-1/2 x 9 Rectangle at 90 Degrees (In.) 10 x 14 and 2 x 16 Vise Swivels (Deg.) 45° Head Movement (Deg.) 45° Blade Size (In.) 1 x .035 x 135 Blade Length (In.) 135 Blade Wheel Diameter (In.) 14 Blade Speed (SFPM) 100 - 350 Bed Height (In.