Warranty

J-7040, 10" X 16" HORIZONTAL

BANDSAW

414478

Exclusive 6-point blade guide assemblies and swivel control panel on this rugged

JET saw enhance overall function and

For added safety, the J-7040 follows strict guidelines and electrical requirements

to be certified by CSA Group

Swing away control panel houses major saw controls

Variable speed drive system allows the operator to easily fine tune the blade

speed

Adjustable blade guide with six contact point system that utilizes cam follower

bearings mounted on eccentric shafts on both sides of the blades

Heavy-Duty transmission utilizes hardened and ground gears operating in an oil

bath

Patented 3-Jaw vise with rapid action moveable jaw for faster set up

One-piece wheel cover

Coolant system

Adjustable material stop

1" Bi-Metal blade

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
J-7040, 10" X 16" HORIZONTAL BANDSAW 414478 Exclusive 6-point blade guide assemblies and swivel control panel on this rugged JET saw enhance overall function and FEATURES For added safety, the J-7040 follows strict guidelines and electrical requirements to be certified by CSA Group Swing away control panel houses major saw controls Variable speed drive system allows the operator to easily fine tune the blade speed Adjustable blade guide with six contact point system that utilizes cam follower bearings moun
PAGE 2
J-7040, 10" X 16" HORIZONTAL BANDSAW 414478 SPECIFICATIONS Cutting Capacity (W x D) (In.) 10 x 16 Round at 90 Degrees (In.) 10 Round at 45 Degrees (In.) 10 Rectangle at 90 Degrees (In.) 10 x 10 and 7 x 16 Rectangle at 45 Degrees (In.) 6-1/2 x 11 Vise Swivels (Deg.) 45° Blade Speeds (SFPM) 100 - 350 Blade Wheel Diameter (In.) 14 Blade Length (In.) 135 Blade Size (In.) 1 x .035 x 135 Bed Height (In.) 23-1/2 Motor (HP) 2 HP, 230V, 3Ph Weight (Lbs.