Use and Care Manual

7
Main materials
Bed Cast iron, ground surface
Bow Cast iron
Stand Steel
Blade drive system Steel, heat-treated worm driving a bronze worm gear in oil bath
Side blade guides Ball bearings mounted on eccentric shafts
Rear blade guides Ball bearings
Band wheels Cast iron
Dimensions
Table plate dimensions
12 x 12 in. (305 x 305 mm)
Overall dimensions, assembled LxWxH
48 x 17 x 40 in. (1219 x 432 x 1016 mm)
Overall dimensions, shipping LxWxH
51.18 x 19.2 x 44.88 in. (1300 x 488 x 1140 mm)
Stand wheels 8 in. (203 mm)
Weights
Net weight 364 lbs. (165 kg)
Shipping weight 408 lbs. (185 kg)
L = length, W = width, H = height FPM = feet per minute CFM = cubic feet per minute
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.