BENCH LATHE Instruction Manual Please read this instruction manual thoroughly and follow all directions carefully.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS AND WATNINGS BEFORE USING THIS TOOL. Operator COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OOPERATOR. PLEASE REMEMBER: 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. 2. Keep work area clean. Cluttered areas invite injuries.’ 3. Consider work area conditions.
Operation 1. Never force the tool or attachment to do the work of a larger industrial tool. It is designed to do the job better and more safely at the rate for which it was intended. 2. Do not carry the tool by its power cord. 3. Always unplug the cord by the plug. Never yank the cord out of the wall outlet. 4. Always turn off the machine before unplugging.
FEATURES 1 2 3 12 4 13 5 14 6 7 15 16 8 17 9 10 11 18 Legend 1. Change gear Cover 11. Quick locking handle 2. Emergency stop switch 12. Spindle box cover 3. Control handle 13. Apron handle 4. Touch panel 14. Apron 5. Spindle speed display 15. Handle 6. Chuck guard with power off 16. X or Y axis auto feeding change handle 7. Tool rest 17. Cover for leadscrew 8. Bed way 18. Leadscrew 9. Splash guard 10.
1. THE HEADSTOCK The brush less motor provides a direct drive to the Spindle via an internal tooth type belt. Spindle speed is variable, and is regulated by the touch Located on the main control panel. The Spindle is provided with an internal No.3 Morse taper to accommodate a center for use with a face plate or turning clamp. The.3-jaw. Self Centering Chuck is mounted on the Spindle Flange.
4.THE CARRIAGE/SADDLE The Saddle carries the Cross-Slide (1) onto which is mounted the Compound Slide (2) with Tool post (3) , allowing intricate and delicate operations to be performed. It may be driven by the Lead screw, via a driver nut, to provide automatic feed when the Auto Feed lever (4), mounted on the Apron (5), is operated.
5. THE MOTOR Disassembly of the motor is not recommended. We use the new type brush less motor, the motor have the big strong power and fix behind the bed way. For all other servicing and repairs. Please contact your dealer. UNPACKING & PREPARING FOR USE Upon receipt, carefully unpack the lathe and inspect to ensure that no damage was suffered in transit and to account for all parts. Should any damage be apparent, or parts are missing, please contact your dealer immediately. The machine is very heavy.
INSTALLATION CAUTION! DO NOT USE THE MACHINE UNTIL INSTALLATION IS COMPLETED AND ALL PRELIMINARY CHECKS HAVE BEEN MADE IN ACCORDANCE WITH THIS MANUAL. MOUNTING THE LATHE The lathe should be mounted on a sturdy workbench of sufficient height so that you do not need to bend your back to perform normal operations. The machine is very heavy, so get assistance from another person when moving the machine. Provide adequate overhead lighting so that you will not be working in your own shadow.
Parts drawing I 9
Parts drawing II 10
Parts list ( I ) No. Description Q'ty No.
Parts list ( II ) No. Description Q'ty No.
Parts list ( III ) No. Description Q'ty No.
Parts list No.
Electrical Circuit Diagram for 230V 15
Electrical Circuit Diagram for 110V 16
Packing list No. Descriptions Q'ty 1 Bench lathe 1 2 Instruction Manual 1 3 L Hex. End Wrench S 2.5; 3; 4; 5; 6. Each 1 4 Double end Wrench 8*10; 14*17; 17*19.
