Use and Care Manual

6 JAT-106,107 Impact Wrenches

Tool specifications
Model number
JAT-106
JAT-107
Stock number 505106 505107
Square drive 3/8 in. 1/2 in.
Bolt capacity 3/8 in. 1/2 in.
Anvil retainer type Ring Ring
Impact mechanism Twin hammer Twin hammer
Maximum torque 500 lbf•ft (677.9 N•m) 500 lbf•ft (677.9 N•m)
Working torque
25-300 lbf•ft
(34-407 N•m)
25-300 lbf•ft
(34-407 N•m)
Free speed 10,000 RPM 10,000 RPM
Blows per minute 1,527 forward; 1,534 reverse 1,573 forward; 1,653 reverse
Average air consumption 5 CFM 5 CFM
Air consumption at load 4 CFM 4 CFM
Air inlet 1/4 in. NPT 1/4 in. NPT
Air hose inside diameter 3/8 in. 3/8 in.
Required air pressure 90 psi (621 kPa) 90 psi (621 kPa)
Vibration value 4.9 m/s
2
4.9 m/s
2
Noise level
1
87 dB(A) 87 dB(A)
Grip Pistol style Pistol style
Overall Length 4.29 in. (109 mm) 4.29 in. (109 mm)
Housing material Aluminum with TPE molded grip Aluminum with TPE molded grip
Net weight 3.35 lb. (1.52 kg) 3.35 lb. (1.52 kg)
Shipping weight 3.68 lb. (1.67 kg) 3.68 lb. (1.67 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.