Use and Care Manual

JET 13

#505108, JAT-108, 1-inch Impact Wrench – parts list
# Part No. Description Qty
1 JAT105-01 Motor housing 1
2 JAT101-02 Spring pin 2x20L mm 1
3 JAT108-03 Air inlet * 1
4 JAT105-04 Trigger * 1
5 JAT101-05 O-Ring 4x1 mm * 1
7 JAT101-07 Exhaust diffuser 1
13 BB-6002ZZ Ball bearing 6002ZZ * 1
14 JAT105-14 Rear end plate * 1
15 JAT105-15 Rotor 1
16 JAT105-16 Rotor vane * 6
17 JAT104-17 Spring pin 3x8L mm * 2
18 JAT105-18 Cylinder * 1
19 JAT105-19 Front end plate * 1
20 JAT105-20 Ball bearing 6003Z * 1
21 JAT105-21 Air regulator 1
22 JAT105-22 O-Ring 45.5x2 mm * 1
23 JAT101-23 Spring 1
24 SB-9/64 Steel ball 9/64 in. 1
25 JAT105-25 Anvil bushing * 1
27 JAT741-21 Spring pin 3x6L mm * 1
28 JAT105-28 Hammer case * 1
30 JAT105-30 O-Ring 64.8x1.6 mm * 2
31 JAT105-31 Gasket * 1
32 JAT105-32 Washer 1
33 JAT105-33 Hammer cage * 1
34 JAT105-34 Hammer * 2
# Part No. Description Qty
35 JAT105-35 Hammer pin 7.6x63.5 mm * 2
36 JAT108-36 Anvil 1 in. * 1
37 JAT108-37 O-Ring 17.8x2.4 mm * 1
38 JAT108-38 Socket retainer * 1
39 TS-1504051 Soc. Hd. Cap Screw M8x25 4
41 JAT101-41 O-Ring 20.35x1.78 mm * 1
42 JAT101-42 Valve spring 1
43 JAT101-43 Valve stem 1
44 JAT101-44 Rubber spacer 1
45 JAT101-45 O-Ring 15.7x1.7 mm * 1
46 JAT101-52 Rubber grip 1
47 JSM7572-67 Damping material 1
52 JAT105-52 Retaining ring RTW-32 1
53 JAT108-53 Inverted Retaining Ring 1
JAT108-HCK Hammer Case Kit - #25,28
JAT108-AA Anvil Assembly - #36,37
JAT108-HK Hammer Kit - #33, 34(2),35(2)
JAT108-FEPK Front End Plate Kit – #19,20,27
JAT108-REPK Rear End Plate Kit - #13,14
JAT108-AIK Air Inlet Kit - #3,41,45
JAT108-RK Trigger Kit - #4,5
JAT108-RPK
Repair Kit -
#5,16(6),22,30(2),31,37,38
JAT108-RBK
Rebuild Kit -
#14,17(2),18,19,27,35(2),36,37
* These parts are only provided in the larger kit or assembly.
