Use and Care Manual

6 JAT-401,402 Die Grinders

Tool specifications
Model number JAT-401 JAT-402
Stock number 505401 505402
Collet size 1/4 in. 1/4 in.
Horsepower 0.5 0.5
Free speed 23,000 RPM 23,000 RPM
Average air consumption 4 CFM 4 CFM
Air inlet 1/4 in. NPT 1/4 in. NPT
Air hose inside diameter 3/8 in. 3/8 in.
Required air pressure 90 psi (621 kPa) 90 psi (621 kPa)
Vibration value 2.2 m/s
2
2.2 m/s
2
Noise level
1
103 dB(A) 103 dB(A)
Speed setting variable
variable
Grip Inline Inline
Overall Length 6-3/4 in. (171.45 mm) 13-3/16 in. (335 mm)
Housing material Aluminum Aluminum
Net weight 1.67 lb. (0.76 kg) 3.11 lb. (1.41 kg)
Shipping weight 1.87 lb. (0.85 kg) 3.33 lb. (1.51 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.