Use and Care Manual

6 JAT-610,611 Pneumatic Drill

Tool specifications
Model number JAT-610 JAT-611
Stock number 505610 505611
Chuck size and type 3/8 in. industrial Jacobs, keyed 1/2 in. industrial Jacobs, keyed
Horsepower 1/2 1/2
Spindle thread 3/8”-24 UNF 3/8”-24 UNF
Free speed 1800 RPM 800 RPM
Average air consumption 4 CFM 4 CFM
Air inlet 1/4 in. NPT 1/4 in. NPT
Air hose inside diameter 3/8 in. 3/8 in.
Required air pressure 90 psi (621 kPa) 90 psi (621 kPa)
Vibration value 0.4 m/s
2
0.2 m/s
2
Noise level
1
94 dB(A) 91 dB(A)
Rotation direction Forward and reverse Forward and reverse
Power setting Variable speed trigger Variable speed trigger
Grip Pistol style Pistol style
Overall Length 8-13/16 in. (223.85 mm) 7-1/4 in. (184.15 mm)
Housing material Aluminum with rubber grip Aluminum with rubber grip
Net weight 2.78 lb. (1.26 kg) 3.79 lb. (1.72 kg)
Shipping weight 3.15 lb. (1.43 kg) 4.14 lb. (1.88 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.