Use and Care Manual

6 JAT-740 Angle Sander

Tool specifications
Model number JAT-740
Stock number 505740
Pad size 7 in. round
Head angle 90 deg.
Horsepower 0.75
Spindle thread 5/8”-11 UNC
Free speed 4500 RPM
Average air consumption 4.2 CFM
Air inlet 1/4 in. NPT
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Vibration value <2.5 m/s
2
Noise level
1
90 dB(A)
Power setting Variable speed
Grip Inline
Overall Length 12 in. (304.8 mm)
Housing material Aluminum with rubber grip
Net weight 4.72 lb. (2.14 kg)
Shipping weight 5.39 lb. (2.44 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.