Use and Care Manual

6 JAT-750/751/752 Mini Belt Sanders

Tool specifications
Model number JAT-750 JAT-751 JAT-752
Stock number 505750 505751 505752
Belt size 3/8 x 13 in.
3/4 x 20-1/2 in. 1/2 x 24 in.
Horsepower 0.5
0.6 0.5
Head rotation 360 deg.
360 deg. 360 deg.
Free speed 20,000 RPM
18,000 20,000
Average air consumption 4.2 CFM
4.2 CFM 4.2 CFM
Air inlet 1/4 in. NPT
1/4 in. NPT 1/4 in. NPT
Air hose inside diameter 3/8 in.
3/8 in. 3/8 in.
Required air pressure 90 psi (621 kPa)
90 psi (621 kPa) 90 psi (621 kPa)
Vibration value 1.3 m/s
2
3.1 m/s
2
1.3 m/s
2
Noise level
1
93 dB(A)
96 dB(A) 93 dB(A)
Power setting Variable speed throttle
Variable speed throttle Variable speed throttle
Grip inline inline inline
Overall length, folded 8-1/8 in. (206.38 mm)
10 in. (254 mm) 12-1/4 in. (311.15 mm)
Overall length, maximum 13 in. (330.2 mm)
15-3/4 in. (400 mm) 18-1/2 in. (470 mm)
Housing material
Aluminum with rubber
grip
Aluminum with rubber
grip
Aluminum with rubber
grip
Net weight 1.94 lb. (0.88 kg) 2.98 lb. (1.35 kg) 2.14 lb. (0.97 kg)
Shipping weight 2.27 lb. (1.03 kg) 3.37 lb. (1.53 kg) 2.51 lb. (1.14 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.