Use and Care Manual

6
JAT-801 Pneumatic Needle Scaler
Tool specifications
Model number JAT-801
Stock number 505801
Stroke length 1-1/8 in.
Retainer type Ball lock
Number of needles 19
Size of needles 3 mm
Blows per minute 4000
Average air consumption 3 CFM
Air inlet 1/4 in. NPT
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Vibration value 14.5 m/s
2
Noise level
1
101 dB(A)
Power setting Variable speed throttle lever
Grip Inline
Overall Length 16-3/8 in. (415.93 mm)
Housing material Steel
Net weight 6.08 lb. (2.76 kg)
Shipping weight 6.50 lb. (2.95 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.