Use and Care Manual

6 JAT-821 Pneumatic Flux Chipper

Tool specifications
Model number JAT-821
Stock number 505821
Stroke length 7/8 in.
Chisel included Wide angle type
Blows per minute 4600
Average air consumption 3 CFM
Air inlet 1/4 in. NPT
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Vibration value 10.2 m/s
2
Noise level
1
104 dB(A)
Power setting Variable speed throttle lever
Grip Inline
Overall Length 14-1/2 in. (368.3 mm)
Housing material Steel
Net weight 4.54 lb. (2.06 kg)
Shipping weight 4.89 lb. (2.22 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.