Use and Care Manual

Important Safety Information (Continued)

Never use plastic (PVC) pipe for compressed air. Serious injury or death could

result.

Never attempt to repair or modify a tank! Welding, drilling or any other modification will weaken

the tank resulting in damage from rupture or explosion. Always replace worn, cracked or

damaged tanks.

Drain liquid from tank daily.

• Tanks rust from moisture build-up, which weakens the tank. Make sure to drain tank regularly and inspect

periodically for unsafe conditions such as rust formation and corrosion.

• Fast moving air will stir up dust and debris which may be harmful. Release air slowly when draining moisture

or depressurizing the compressor system.

Spraying Precautions

Do not spray flammable materials in vicinity of open flame or near ignition sources including

the compressor unit.

• Do not smoke when spraying paint, insecticides, or other flammable substances.

• Use a face mask/respirator when spraying and spray in a well ventilated area to prevent health and fire

hazards.

• Do not direct paint or other sprayed material at the compressor. Locate compressor as far away from the

spraying area as possible to minimize overspray accumulation on the compressor.

• When spraying or cleaning with solvents or toxic chemicals, follow the instructions provided by the chemical

manufacturer.

Save These Instructions

Do Not Discard

The DANGER, WARNING, CAUTION, and NOTICE notifications and instructions in this manual cannot

cover all possible conditions and situations that may occur. It must be understood by the operator that

caution is a factor which cannot be built into this product, but must be supplied by the operator.

MAINTENANCE /

REPAIR TROUBLESHOOTING OPERATION

ASSEMBLY /

INSTALLATION

SAFETY /

SPECIFICATIONS GETTING STARTED