Use and Care Manual

JET
5
Tool specifications
Model number JCT-3640 JCT-3641 JCT-3642
Stock number 550640 550641 550642
Shank bushing style Round Hex Round
Shank bushing size 0.68 in. 0.58 in. 0.68 in.
Stroke length 2 in. 2 in. 3 in.
Bore size 1-1/8 in. 1-1/8 in. 1-1/8 in.
Impact rate (blows per minute) 1,900 1,900 1,700
Average air consumption 7 CFM 7 CFM 8 CFM
Air Inlet 3/8 in. NPT 3/8 in. NPT 3/8 in. NPT
Air hose minimum inside
diameter
1/2 in. 1/2 in. 1/2 in.
Required air pressure 90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar)
Force per blow @90psi 27.3 Joule 27.3 Joule 28.01 Joule
Vibration value 14.69 m/s
2
14.69 m/s
2
21.14 m/s
2
Noise level
1
97.1 dB(A) 97.1 dB(A) 97.6 dB(A)
Overall length 13-1/4 in. (336.6 mm) 13-1/4 in. (336.6 mm) 15-1/4 in. (387.4 mm)
Housing material steel steel steel
Net weight 15.2 lb. (7 kg) 15.2 lb. (7 kg) 16 lb. (7.3 kg)
Shipping weight 17 lb. (7.7 kg) 17 lb. (7.7 kg) 18 lb. (8 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.