Use and Care Manual

JET
5
Tool specifications
Model number JCT-5670
Stock number 550670
Chuck size and type 1/2 in., keyed
Horsepower 1 HP
Stall torque 22 N•m (16.2 lbf•ft)
Spindle thread 1/2"-20 UNF
Free speed 1200 RPM
Average air consumption 5 CFM
Air inlet 3/8 in. NPT
Air hose minimum inside diameter 1/2 in.
Required air pressure 90 psi (621 kPa)
Vibration value < 2.5 m/s
2
Noise level
1
89.1 dB(A)
Rotation direction Forward only
Power setting Variable speed trigger
Grip D-handle, and side-mounted handle
Overall Length 14.1 in. (358 mm)
Housing material Aluminum
Net weight 7.1 lb. (3.2 kg)
Shipping weight 9 lb. (4 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.