Use and Care Manual

JET
5
Tool specifications
Model number JCT-6680
Stock number 550680
Wheel size (Dia x Bore x Thk) 6 x 5/8 x 1 in. (152.4 x 16 x 25.4mm)
Spindle thread 5/8in.–11
Horsepower 1.4 HP
Free speed 6,300 RPM
Average air consumption at load 24 CFM
Air inlet 3/8 in. NPT
Air hose minimum inside diameter 1/2 in.
Required air pressure 90 psi (6.2 bar)
Vibration value 4.19 m/s
2
Noise level
1
88.8 dB(A)
Speed settings Variable throttle
Overall length 21-1/4 in. (540 mm)
Housing material Aluminum
Grip style Inline
Net weight 9.1 lb. (4 kg)
Shipping weight 10 lb. (4.5 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.