Full Product Manual

6
4.0 Specifications
Table 1
Model number
JIGM-8
Stock number 577208
Motor and Electricals
Motor type induction, capacitor start, centrifugal switch
Horsepower 1 HP
Phase single
Voltage 115/230V (prewired 115V)
Cycle 60 Hz
Listed FLA (full load amps) 11/5.5 A
Start capacitor 200MFD 125VAC
Run capacitor
35μF 250V
Motor speed 3800 RPM
On/off switch paddle with safety key
Power transfer Direct drive
Power cord 16AWG 300V, 6 ft. (182cm)
Power plug installed 125V
Recommended circuit size
1
15A
Sound emission without load
2
75dB at 3ft.
Arbor and grinding wheel
Arbor diameter 5/8 in. (16mm)
Wheel size (dia. x width) 8 x 1 in. (16 x 25.4mm)
Wheel bore 5/8 in. (16mm)
Wheel grit, material 36 grit, aluminum oxide
Wheel grit 36 G
Wheel flange diameter 3-3/8” (85mm)
Wheel speed 3800 RPM
Arbor nut max. tightening torque
20 lbf-ft (270kgf-cm)
Toolrest distance to wheel adjustable
Abrasive belt
Belt size 36 x 2 in. (915 x 51 mm)
Belt grit, material 100 grit, zirconia alumina
Belt speed 5000 SFPM
Contact wheel (p/n 577115) 3-1/2 Dia. x 2 in. (51 x 89 mm)
Platen size 2 x 6 in. (50.8 x 153 mm)
Grinding disc
Disc diameter 7 in. (178 mm)
Disc grit, material 80 grit, zirconia alumina
Disc speed 3800 RPM
Main materials
Arbor steel
Base cast iron
Body cast iron
Inner wheel guard cast iron
Outer wheel guard aluminum
Wheel flanges cast iron
Tool rest cast iron
Eye shield clear polycarbonate
Spark guard steel
Knob polymide