Full Product Manual

7
Dust/swarf collection
Dust port outside diameter 2-1/2 in. (63.5mm)
Recommended min. extraction volume 350 CFM
Dimensions
Mounting hole centers 8-1/2 in. (215mm)
Mounting hole diameters 7/16 in. (11mm)
Footprint, LxW 9-1/2 x 8 in.(241.6x206.6mm)
Assembled dimensions, LxWxH
(approx.)
Horizontal position 17-3/4 x 18 x 10 in. (451 x 457 x 254 mm)
Vertical position 17-3/4 x 12 x 17-1/2 in. (451 x 305 x 445 mm)
Shipping dimensions, LxWxH 24-1/2 x 24-1/2 x 19 in. (622 x 622 x 483 mm)
Dust/swarf collection
Dust port outside diameter 2 in. (59mm)
Recommended minimum extraction volume 350 CFM
Weights
Net weight 64 lb (29.20 kg)
Shipping weight 70 lb (31.73 kg)
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height SFPM = surface feet per minute
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
4.1 Mounting hole dimensions
Figure 4-1: JIGM-8 hole centers