Use and Care Manual

6
4.0 Specifications
Table 1
Model number
IBGM-8VS
Stock number 577218
Motor and Electricals
Motor type Totally enclosed fan-cooled induction with inverter
Horsepower (true output) 1
Motor phase 3
Voltage 115/230V (prewired 115V)
Input power
single phase
Cycle 60 Hz
Listed FLA (full load amps) 7 / 3.5 A
On/off switch TACT switch
Motor speed Variable, 900-3600 RPM
Power cable size 16AWG x 3C SJT, 6 ft. (182 cm)
Power plug installed 5-15P, 125V/15A
Recommended circuit size
1
15A
Sound emission without load
2
75 dB at 3 ft.
Arbor and grinding wheel
Arbor diameter 5/8 in. (16mm)
Wheel size (dia. x width) 8 x 1 in. (16 x 25.4mm)
Wheel bore 5/8 in. (16mm)
Wheel material aluminum oxide
Wheel grit 36 grit
Wheel flange diameter 3-3/8 in. (85mm)
Wheel speed Variable, 900-3600 RPM
Arbor nut maximum tightening torque 20 lbf•ft (270 kgf•cm)
Tool rest distance to wheel adjustable
Abrasive belt
Belt size 36 x 2 in. (915 x 51 mm)
Belt grit, material 100 grit, zirconia alumina
Belt speed 5000 SFPM
Contact wheel (p/n 577115) 3-1/2 Dia. x 2 in. (51 x 89 mm)
Platen size 2 x 6 in. (50.8 x 153 mm)
Abrasive disc
Disc diameter 7 in. (178 mm)
Disc grit, material 80 grit, zirconia alumina
Disc speed 3,450 RPM
Main materials
Arbor Steel
Base Cast iron
Motor housing Sheet metal
Inner wheel guard Cast iron
Outer wheel guard Aluminum
Flange washers Cast iron
Tool rest Cast iron
Eye shield Clear polycarbonate
Spark guard Steel
Knob Polymide
Dust/swarf collection
Dust port outside diameter 2-1/2 in. (63.5 mm)
Required min. extraction volume 350 CFM