Use and Care Manual

7
Dimensions
Mounting hole centers 8-1/2 in. (215mm)
Mounting hole diameters 7/16 in. (11mm)
Footprint (width x depth) 9-1/2 x 8-1/16 in. (241.6 x 205 mm)
Assembled dimensions
LxWxH (approx.)
Horizontal position 17-3/4 x 18 x 10 in. (451 x 457 x 254 mm)
Vertical position 17-3/4 x 12 x 17-1/2 in. (451 x 305 x 445 mm)
Shipping dimensions (LxWxH) 24-1/2 x 24-1/2 x 19 in. (622 x 622 x 483 mm)
Dust/swarf collection
Dust port outside diameter 2-1/2 in. (63.5 mm)
Required min. extraction volume 350 CFM
Weights
Net weight 80 lb (36.3 kg)
Shipping weight 86.5 lb (40 kg)
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
4.1 Mounting hole dimensions
Figure 4-1: IBGM-8VS hole centers