Warranty

ManualsBrandsJet ManualsBench GrindersVariable Speed Combination 8 in. Industrial Grinder and 2 in. x 48 in. Belt Sander 1HP 115-Volt, IBGB-248VS

IBGB-248VS 8-INCH VARIABLE

SPEED INDUSTRIAL GRINDER

AND 2 X 48 BELT SANDER

577248

The Variable Speed IBGB-248VS Combination 8’’ Grinder and Belt Sander is

engineered with industrial strength construction, sealed bearings, and a powerful

enclosed one horsepower motor meant for heavy usage. The Variable Speed

IMBGB-248VS includes a digital readout that allows operators to accurately monitor

the RPMS and SFPM. The electric motor brake quickly stops the wheels from 3,600

RPMs to 0 in less than 20 seconds.

Heavy-duty capacitor motor

Rubber sealed bearings for years of maintenance free sanding on idle wheel

Industrial strength construction for demanding usage

Totally enclosed pre-lubricated ball bearings for motor

CSA/US: Following strict guidelines and electrical requirements, this JET

Combination 8" Grinder and Belt Sander is CSA/US certified

Large eye safety shields

Innovative safety guarding surrounding the sanding belt

Rubber mounts prevent movement

Variable speed provides wide range of speeds

Two 2" round dust ports

Wheel dresser included

Belt tensioning handle

Removable platen

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most

cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET

tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Summary of content (2 pages)

PAGE 1
IBGB-248VS 8-INCH VARIABLE SPEED INDUSTRIAL GRINDER AND 2 X 48 BELT SANDER 577248 The Variable Speed IBGB-248VS Combination 8’’ Grinder and Belt Sander is engineered with industrial strength construction, sealed bearings, and a powerful enclosed one horsepower motor meant for heavy usage. The Variable Speed IMBGB-248VS includes a digital readout that allows operators to accurately monitor the RPMS and SFPM. The electric motor brake quickly stops the wheels from 3,600 RPMs to 0 in less than 20 seconds.
PAGE 2
IBGB-248VS 8-INCH VARIABLE SPEED INDUSTRIAL GRINDER AND 2 X 48 BELT SANDER 577248 SPECIFICATIONS Shaft Diameter (In.) 5/8 Belt Size (W x L) (In.) 2 x 48 Belt Speed (SFPM) 1178 - 4712 Motor (HP) 1HP, 115/230V, Single Phase Overall Dimensions (L x W x H) (In.) (sanding bracket is parallel) 21-1/4 x 24-3/4 x 1315/16 Overall Dimensions (L x W x H) (In.) (sanding bracket is vertical) 21-1/4 x 12-9/32 x 2529/32 Weight (Lbs.) 96 Net Weight (Lbs.