Use and Care Manual
Table Of Contents
- Industrial Buffing Machines
- 1.0 IMPORTANT SAFETYINSTRUCTIONS
- 2.0 Table of contents
- 3.0 About this manual
- 4.0 Specifications
- 5.0 Setup and assembly
- 6.0 Electrical connections
- 7.0 Operation
- 8.0 User-maintenance
- 9.0 Troubleshooting IBG-SSB series Buffers
- 10.0 Optional accessories
- 11.0 Replacement Parts
- 12.0 Electrical Connections
- 13.0 Warranty and Service
7
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Mounting hole dimensions
Figure 4-1: IBG-8SSB
Figure 4-2: IBG-10SSB and IBG-12SSB