Use and Care Manual

8
6.0 Shipping Contents
Figure 1 – Contents of the Main Carton
7.0 Unpacking
Remove all contents from the shipping carton.
Do not discard the carton or packing material
until your Model JJP-10BT Jointer-Planer is
assembled and is running satisfactorily.
Compare the contents of the carton against the
list of parts shown on these pages. The letter
identification in the list corresponds to the items
shown in the Figures. This is your key for
identifying the parts used throughout the
Assembly section for easy reference.
Remove the protective coating that is applied to
the table with a household grease-and-spot
remover.
Figure 2 – Tools Included
Contents of the Main Carton
01 Jointer Fence – A 0
01 Dust Chute – B
01 Cutterhead Guard – C
02 Long Support Plate – D
02 Short Support Plate – E
01 Jointer-Planer – F
02 Long Stand Top Support – G
02 Short Stand Top Support – H
01 Planer Outfeed Table Extension – J
01 2-1/2" to 4" Hose Adapter – K
02 Push Block – L
01 Owner's Manual – M
04 Stand Leg – N
Tools Included
01 8/10mm Open-end Wrench – O
01 Knife Setting Gauge (p/n JJP8BT-KSG) – P
01 3, 5, 6mm hex wrenches (set of 3) – Q