Use and Care Manual

• REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before

plugging in.

• USE REOMMENDED ACCESSORIES. Consult the operator’s manual for recommended accessories.

The use of improper accessories may cause risk of injury to persons.

• NEVER STAND ON A MACHINE. Serious injury could occur if the machine tipped of if the blade is

unintentionally contacted.

• CHECK DAMAGED PARTS. Before further use of the machine, a guard or other part that is damaged

should be carefully checked to determine that it will operate properly and perform its intended function -

check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other

conditions that may affect its operation. A guard or other part that is damaged should be properly repaired

or replaced.

• DIRECTION OF FEED. Feed work into the cutter against the direction of rotation of the cutter only.

• NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN POWER OFF. Don’t leave the

machine until it comes to a complete stop.

• Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain

chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

- Lead from lead based paint.

- Crystalline silica from bricks, cement and other masonry products.

- Arsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to

these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or

dust masks that are specifically designed to filter out microscopic particles.

• Do not use this shaper for other than its intended use. If used for other purposes, JET disclaims any real or

implied warranty and holds itself harmless from any injury that may result from that use.

• Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible

machine damage.

This means that if precautions are not heeded, it may result in serious, or possibly even fatal,

injury.