Use and Care Manual

7
5.0 Specifications
Model number .......................................................................................................................... JWS-25CS
Stock number ................................................................................................................................ 708322
Motor and electricals:
Motor type .................................................................totally enclosed fan cooled, induction, capacitor start
Horsepower ......................................................................................................................... 3 HP (2.2 kW)
Phase ............................................................................................................................................... single
Voltage ....................................................................................................................................... 230V only
Cycle ................................................................................................................................................. 60Hz
Listed FLA (full load amps) ................................................................................................................. 16 A
Start capacitor ............................................................................................................... 600MFD, 125VAC
Run capacitor ..................................................................................................................... 40μF, 300VAC
Power transfer ...................................................................................................................................v-belt
On/off switch ........................................................................................................... magnetic, push button
Motor speed .............................................................................................................................. 3450 RPM
Recommended circuit and fuse/breaker size
1
...................................................................................... 30 A
1
subject to local/national electrical codes
Spindle:
Spindle speeds ...................................................................................................... 8,000 and 10,000 RPM
Spindle size ........................................................................................................................... 1/2" and 3/4"
Under-nut capacity ................................................................................................... (1/2”) 2-3/4”; (3/4”) 3”
Spindle travel.......................................................................................................................................... 3”
Table and Fence:
Table size ............................................................................................................................... 25”L x 25”W
Table height ......................................................................................................................................... 34”
Table miter slot ................................................................................................................. 3/8” x 3/4" T-slot
Table opening diameter .......................................................................................................................... 7”
Insert opening diameter .................................................................................................... 1-5/8”, 3”, 3-1/2”
Fence size (x2) .............................................................................................................. 9-1/2”W x 2-3/4”H
Other:
Overall dimensions ..................................................................................................... 26”W x 26”D x 44”H
Dust chute diameter ............................................................................................................................... 4”
Net weight (approx..) ....................................................................................................................... 320 lb.
Shipping weight (approx..) ............................................................................................................... 340 lb.
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.