Use and Care Manual

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model JWP-15DX Planer. This manual contains instructions on installation, safety precautions,
general operating procedures, maintenance instructions and parts breakdown. This machine has been
designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number..........................................................................................................................JWP-15DX
Stock Number................................................................................................................................ 708538
Maximum Cutting Width (in.)............................................................................................................14-7/8
Maximum Cutting Thickness (in.) .............................................................................................................6
Full Width Cutting Depth (in.) ................................................................................................................1/8
Maximum Cutting Depth (in.)...............................................................................................................3/16
Minimum Planing Length (in.)...................................................................................................................8
Number of Knives....................................................................................................................................3
Cutterhead Speed (RPM).................................................................................................................. 4,500
Cuts Per Minute.............................................................................................................................. 13,500
Cutterhead Diameter (in.)...................................................................................................................2-7/8
Feed Rate (FPM)....................................................................................................................... 16 and 20
Dust Chute Diameter (in.) ........................................................................................................................4
Motor...........................................................................................................TEFC, 3HP, 1Ph, 230V, 60Hz
Overall Dimensions (LxWxH)(in.) ......................................................................................48 x 28 x 43-1/2
Net Weight (lbs.)..................................................................................................................................475
Gross Weight (lbs.).............................................................................................................................. 590
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.