Use and Care Manual

7
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Planer is
assembled and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Planer
1 Dust Hood
2 Extension Tables
1 Handwheel
1 Handle
2 Magnet Tools
4 Hex Wrenches (3,4,5 and 6mm)
1 T-handle Hex Wrench (4mm)
3 Open-end Wrenches (8-10, 12-14,14-17)
3 Bags of Fasteners – see below
1 Owner's Manual
1 Warranty Card
Contents of fastener bags (Figure 2):
A – (for installing Handwheel)
1 Direction Label
1 Hex Nut
1 Flat Washer
1 Key
B – (for installing Extension Tables)
6 Hex Cap Screws, M8x25
6 Socket Set Screws, M8x20
C – (for installing Dust Hood)
6 Hex Washer Head Screws, M6x12
Figure 1
Figure 2