Warranty

JSG-6DC, 6" X 48" BELT / 12" DISC
SANDER, 1-1/2HP, 1PH 115/230V
708599
The JET JSG-6DC Sander combines a 12" disc and a 6" x 48" belt to provide raw
industrial 1.5 HP sanding power. The exclusive dual thumbscrew belt tracking
adjustment locks to keep the belt on track while tackling any tough application. The
sander boasts both a quick release belt tension lever and a quick lock dust cover for
the disc. The built in handle allows for easy portability around the workshop.
Two precision-ground cast iron tables have positive stops at 90° and 45° for
sanding flat pieces or mitered angles; allows belt sander to be used vertically,
horizontally or anywhere in-between
Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track
during use
Graphite covered steel platen runs cooler increasing machine and belt life
Specially designed belt guard allows full use of the 6" belt width and length
Drive drum is rubber-coated for a better grip on the sanding belt resulting in less
slippage
Tracking adjustment knob with quick-lock handle keeps belt on track during use
Quick-release belt tension lever makes belt changes fast and easy
Quick-lock dust cover allows fast disc changes
Single 4" dust port on the back of the base collects dust effectively from both the
belt and disc
Powerful 1-1/2HP motor easily handles the toughest sanding operations
Built-in handles for easier portability
FEATURES
JET RED ASSURANCE 5-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United
States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you
in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area
call 1-800-274-6848.