Full Product Manual
Table Of Contents
- 16-speed Woodworking Drill Press
- 1.0 Warranty and Service
- 2.0 Table of contents
- 3.0 Safety warnings
- 4.0 About this manual
- 5.0 Specifications
- 6.0 Setup and assembly
- 7.0 Electrical connections
- 8.0 Adjustments
- 9.0 Operating controls
- 10.0 Operation
- 11.0 User-maintenance
- 12.0 Speed chart
- 13.0 Troubleshooting the JDP-17
- 14.0 Replacement Parts
- 15.0 Electrical Connections – JDP-17 Drill Press
5
29. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
30. Do not stand on the machine. Serious injury
could occur if the machine tips over.
31. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
32. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
33. Don’t use in dangerous environment. Don’t
use power tools in damp or wet location, or
expose them to rain. Keep work area well
lighted.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even
fatal, injury.
4.0 About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
JDP-17 Drill Press. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with the instructions as set forth in this
document.
This manual is not intended to be an exhaustive guide to drill press operational methods, use of jigs or after-
market accessories, choice of bits or wood stock, etc. Additional knowledge can be obtained from experienced
users or trade articles. Whatever accepted methods are used, always make personal safety a priority.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!