Warranty

ManualsBrandsJET ManualsTools & Hardware12 in. Woodworking Lathe Stand

Assembly Instructions and Parts List

Stand for JWL-1221VS Lathe

Stock No. 719202

Read and understand the

entire owner's manual that accompanied your

JWL-1221VS lathe before attempting assembly

or operation of accessories.

Inspect contents for shipping damage. Report any

damage or part shortages to your distributor. Do

not discard shipping materials until accessory is set

up and functioning properly.

Shipping contents

1 Tool basket assembly

1 Cross bar

2 Stands

2 Tubes

2 Brackets

2 Hex cap screws, M12x35mm

2 Lock washers, M12

2 Flat washers, M12

4 Socket head cap screws, 5/16x1-1/4”

4 Socket head button screws, 5/16x1”

8 Socket head button screws, 5/16x1/2”

8 Lock washers, 5/16”

12 Flat washers, 5/16”

4 Levelers with 3/8” hex nut

Tools required for assembly

5mm and 6mm hex keys (“Allen wrenches”)

Ratchet wrench with 19mm socket and extension

9/16” (or adjustable) wrench

Assembly

(Parts in brackets refer to index numbers in the

exploded view.)

1. Install a leveler [18] with nut [19] at each end

of a stand [2]. The levelers can be adjusted for

height, and the hex nut tightened up against

the stand [2] to secure the setting.

2. Assemble each stand [2] (the recess will face

outward) to a tube [3], with hex cap screw [6],

lock washer [16] and flat washer [15]. The

holes in the tubes should face inward. Firmly

tighten the screw.

3. Mount a bracket [1] to each leg set (the ledge

will face inward) with two 5/16x1” button head

screws [17] and lock washers [13]. Multiple

holes allow adjustment of lathe height. Do not

fully tighten yet.

4. Install tool tray [7] between the legs with four

5/16x1/2” button head screws [5] and flat

washers [12]. Do not fully tighten yet.

5. With help from an assistant, place your lathe

onto the stand brackets, and secure with four

5/16x1-1/4 socket head cap screws [14], lock

washers [13] and flat washers [12]. Firmly

tighten screws.

6. Fully tighten all screws used in steps 2 and 3.

Specifications

Stock number: ................. 719202

Assembled dimensions: .. 788 x 574 x 719 mm

(31”L x 22.6”W x 28.3”H)

Net weight: ..................... 33 kg (72.75 lb)

Shipping dimensions: ..... 760 x 710 x 205 mm

(29.92 x 27.95 x 8.07”)

Shipping weight: ............. 36kg (79.37 lb)

WALTER MEIER (Manufacturing) Inc.

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-719202

Ph.: 800-274-6848 Revision B 07/2013

Summary of content (2 pages)

PAGE 1
Assembly Instructions and Parts List Stand for JWL-1221VS Lathe Stock No. 719202 Read and understand the entire owner's manual that accompanied your JWL-1221VS lathe before attempting assembly or operation of accessories. holes in the tubes should face inward. Firmly tighten the screw. 3. Mount a bracket [1] to each leg set (the ledge will face inward) with two 5/16x1” button head screws [17] and lock washers [13]. Multiple holes allow adjustment of lathe height. Do not fully tighten yet. 4.
PAGE 2
# 719202 Stand for JWL-1221VS Lathe Index No Part No Description Size Qty 1 ................ JWL1221VS-401 ........ Upper Bracket ........................................................... ...................................... 2 2 ................ JWL1221VS-402A ...... Stand ........................................................................ ...................................... 2 3 ................ JWL1221VS-403 ........ Tube ....................................................................