Use and Care Manual

head casting; counterclockwise will decrease

the distance. This adjustment is very sensitive

and it should not be necessary to turn the

sprocket more than one or two teeth.

7. When adjustments are correct, replace chain

around corner sprocket, slide idler sprocket (S,

Figure 9-3) back to re-tension chain, tighten bolt

(R) and insert and tighten bolt (P).

9.4 Lubrication points

Items on this chart are referenced to the surrounding illustrations.

Item Action Suitable Types of Lubricant Reference

Drive chain Monthly General purpose grease Figure 9-1

Gear box Drain and refill every 2,500

hours

Standard gear oil, 70-90 weight

Figure 9-1

Lead screw (x4) Once every 3 months General purpose grease #3, Figure 9-4

Column (x4) Clean and lubricate weekly Light coat of SAE-30 oil #4, Figure 9-4

Table chain Every 4 to 6 months Grease, or good quality bicycle

chain lubricant

#5, Figure 9-5

Feed roller shafts Every 30 hours Clean and apply SAE-30 oil. #6, Figure 9-4

Anti-kickback fingers,

infeed roller, cutterhead

Clean and lubricate as

needed.

Light coat of SAE-30 oil.

Figure 8-4

Table 3

Figure 9-4

Figure 9-5