Use and Care Manual

5
4.0 Specifications for JWDS-2244OSC
Table 1
Model number
JWDS-2244OSC
Stock numbers
Sander/conveyor 723544
Sander/conveyor/closed stand 723544OSCK
Closed stand 723544CS
Accessories (separate
purchase unless
indicated otherwise)
Folding Infeed/outfeed tables 723551
Digital readout 723552
Motor and Electricals
Drum motor type Totally enclosed, fan-cooled induction
Horsepower 1-3/4 HP (1.3 kW)
Phase 1
Voltage 115 V
Cycle 60 Hz
Listed FLA (full load amps) 15 A
Motor speed 1725 RPM
Starting amps 43 A
Running amps (no load) 6.8 A
Start capacitor 300MFD 125VAC
Run capacitor
50μF 250VAC
Conveyor motor type totally enclosed DC
Horsepower 1/30 HP (25 W)
Phase 1
Voltage 115 V
Listed FLA (full load amps) 0.6 A
Motor speed 54 RPM
Oscillating motor type totally enclosed DC
Horsepower 1/30 HP (25 W)
Phase 1
Voltage 115 V
Listed FLA (full load amps) 0.6 A
Motor speed 120 RPM
On/off switch Toggle with safety key
Power transfer Direct drive
Power cable and plug SJT 12AWG x 3C 300V, 6 ft., 15A plug
Recommended circuit size
1
20 A
Sound emission
2
68.5 dB at 100cm; 70 dB at 50cm
Capacities
Maximum board width (single pass) 22 in. (55.9 cm)
Maximum board width (two passes) 44 in. (111.76 cm)
Maximum board thickness 4 in. (102 mm)
Minimum board length 2-3/8 in. (60 mm)
Minimum board thickness
3
1/32 in. (0.8 mm)
OPTIONAL infeed/outfeed table capacity 35 lbs. (16 kg)
Main materials
Main body aluminum die casting and steel
Drum extruded aluminum
Conveyor table steel
Drum height adjustment handle Aluminum die casting and plastic
OPTIONAL Infeed/Outfeed tables steel