Use and Care Manual

6
Sanding Drum
Drum dimensions, L x Dia 23 x 5 in. (584 x 127mm)
Drum speed 1725 RPM
Oscillation speed
Variable, 0-120 strokes per minute;
3/4" (19mm) stroke
Abrasive installed 80 Grit
Drum elevation per one rotation of handwheel 1/16 in. (1.6 mm)
Conveyor
Conveyor speed variable within 0 to 10 FPM (0-3 MPM)
Conveyor table dimensions 26 x 21-3/4 in. (660.4 x 552.5 mm)
Conveyor height from floor 33-3/4 in. (857 mm)
Dust collection
Dust port outside diameter 4 in. (100 mm)
Recommended minimum extraction volume 550 CFM (15.6 CMM)
Dimensions
Assembled dimensions, mounted to closed stand, LxWxH 47-1/4 x 24 x 52 in. (120 x 61 x 132 cm)
Shipping crate, base machine, LxWxH 52 x 27-1/2 x 28-1/4 in. (132 x 70 x 71.75 cm)
Shipping carton, closed stand, LxWxH 40-9/16 x 19-11/16 x 30-5/16 in. (103 x 50 x 77 cm)
Weights
Net weight, base machine only (approx.) 216 lbs. (98 kg)
Shipping weight, base machine only (approx.) 289 lbs. (131.5 kg)
1
Subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
3
Use of a carrier or backer board (not provided) is recommended for cuts 1/16” or less. See sect. 9.3.
L=length, W=width, H=height, Dia=diameter
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.