Product Manual

7
Tailstock
Tailstock spindle travel 3-1/2 in. (89 mm)
Diameter of tailstock spindle 1-1/4 in. (31.8 mm)
Taper in tailstock spindle MT3
Main materials
Headstock Cast iron
Bed Cast iron
Apron/Saddle Cast iron
Tailstock Cast iron
Splash guard Steel
Stand Steel
Dimensions
Bed width 7-1/8 in. (181 mm)
Overall dimensions, L x W x H
66-3/16 x 29-1/2 x 57-1/2 in. (1681 x 749.3 x 1460.5 mm)
Shipping dimensions, L x W x H 66-1/2 x 29-9/16 x 57-1/8 in. (1690 x 750 x 1451 mm)
Weights
Net weight, approx. 1210 lb. (548.8 kg)
Shipping weight, approx. 1430 lb. (648.6 kg)
1
subject to local and national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, TPI = threads per inch
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Dimensions for provided stand
Figure 4-1: stand dimensions